NeoDen ND680 Offline AOI Machine
Description
Test mode:
Optimized detection technology covering the whole circuit board. Jointed board and multiple marks, with Bad Mark function.
Detection type:
Component defects such as whether there is solder paste, offset, insufficient solder, excess solder, open circuit and contamination;
mounting defects such as missing part, offset, skewing, tombstone, mounting on side, turnover, wrong parts, damage and reversal, etc.;
solder joint defects such as excess solder, insufficient solder, pseudo soldering, and solder bridge, etc.;
and PCB defects such as copper foil contaminated, black pad, de-lamination, copper foil missing, and oxidation, etc.
Image recognition:
Automatically set the parameters (e.g. shift, polarity, short circuit, etc.) according to different inspection requirements.
SPC statistical function: Record the test data in the whole process and carry out statistics and analysis, and production status and quality analysis can be viewed in any area.
Camera and lighting system:
Full-color high-speed digital CCD camera, with resolution of lens of 10, 15, 18 and 20um, three-channel RGB light source.
Driving system:
AC servomotor system, precision grinding ball screw.
Specification
Product Name |
NeoDen ND680 Offline AOI Machine |
PCB dimension |
50*50mm(Min) - 400*360mm (Max) |
PCB degree of curvature |
< 5mm or 3% of the diagonal length of PCB |
PCB component height |
above: < 30mm, below: < 50mm |
Positioning accuracy |
<16um |
Movement speed |
800mm/sec |
Image processing speed |
0402 chip < 12ms |
Overall dimension of equipment |
1000*950*1580mm |
Air pressure requirement |
pipeline compressed air, ≥0.49MPa |
Equipment weight |
560KG |