NeoDen ND800 Online AOI Machine
Feature
Inspection system Application: After stencil printing, pre/post reflow oven, pre/post wave soldering, FPC etc.
Inspection Items:
1) Stencil printing: Solder unavailability, insufficient or excessive solder, solder misalignment, bridging, stain, scratch etc.
2) Component defect: missing or excessive component, misalignment, uneven, edging, opposite mounting, wrong or bad component etc.
3) DIP: Missing parts, damage parts, offset, skew, inversion, etc
4) Soldering defect: excessive or missing solder, empty soldering, bridging, solder ball, IC NG ,copper stain etc.
Calculation Method: Machine learning, color calculation, color extraction, gray scale operation, image contrast.
Inspection mode: PCB fully covered, with array and bad marking function.
SPC statistics function: Fully record the test data and make analysis, with high flexibility to check production and quality status.
Optical system:
Camera: 5 million pix full color high speed industrial digital camera ,20 million pix camera optional.
Lens resolution: 10um/15um/18um/20um/25um, can be custom-made.
Lighting source Annular stereo multi-channel color light, RGB/RGBW/RGBR/RWBR optional.
Minimum component: 0201 chip, 0.3 pitch IC.
Specification
Model |
ND800 |
PCB Thickness |
0.3mm~5mm |
Max. PCB Size (X x Y) |
400mm x 360mm |
Min. PCB Size (Y x X) |
50mm x 50mm |
Max. Bottom Gap |
75mm |
Max. Top Gap |
35mm |
Moving speed |
830mm/Sec(Max) |
Transmission height from the ground |
900±20mm |
Air pressure |
0.4 – 0.8MPa |
PCB bending |
<5mm or 3% of PCB Diagonal length |
Power |
AC220V,50/60Hz,1.5KW |
Machine dimension |
980mm * 980mm * 1620mm |
Weight |
550KG |